BOOK CHAPTERS - J.J. Poveromo

Joseph J. Poveromo, chapter on “Use of Industrial Minerals in Agglomeration Processes” in the book: IMAR7: Industrial Rocks & Minerals, 7th Edition, Society of Mining Engineers, 2005

Joseph J. Poveromo and Arden W. Swanson, chapter on “Iron Bearing Raw Materials for Direct Reduction” in the book: Direct Reduced Iron – Technology and Economics of Production and Use, Editors: J. Feinman, D.R. MacRae, 1999, Iron & Steel Society, Warrendale, Pa.

Joseph J. Poveromo, chapter on “Iron Ores” in the book: The Making, Shaping and Treating of Steel, 11th Edition, Ironmaking Volume, Editor: D. Wakelin, 1999, The AISE Steel Foundation, Pittsburgh, Pa.

PUBLICATIONS, LECTURES, PRESENTATIONS - J. J. Poveromo

Joseph J. Poveromo and Ralph Smailer, “Overview of Direct Reduction & Alternative Ironmaking Processes & Products”, AIST Specialty Conference on “Scrap Substitutes & Alternative Ironmaking IV”, Baltimore, Nov. 2, 2008

Joseph J. Poveromo, “Use of HBI in the Blast Furnace”, HBIA (Hot Briquetted Iron Assoc.) Seminar, Baltimore, Nov. 2004, Pittsburgh, May 2004

Fred C. Rorick, and Joseph J. Poveromo, “Technical Progress in North American Ironmaking”, ABM ( Associacao Brasilieira de Metalurgia e Materiais ) 3rd International Meeting on Ironmaking, 2nd International Symposium on Iron Ore, September 22 – 26, 2008, San Luis, Maranhao, BRAZIL

Tony Palermo & Joseph J. Poveromo, “The Potential Impacts of Trends in End User Markets, Trade Flows, Consolidation, Alliances, and Vertical Integration on Steel Industry Production Practices in the Americas”, Scanmet III, Lulea, Sweden, June 2008

Joseph J. Poveromo, “The Iron Burden”, COREM Pelletizing Symposium, June 2-4, 2008, Quebec City

J. J. Poveromo, "Future Trends in Ironmaking", McMaster University Blast Furnace Ironmaking Course, Hamilton, Ontario, June 2004, June 2006, May 2008

Joseph J. Poveromo, “ Blast Furnace Fuel Injection Overview”, Eastern States Blast Furnace & Coke Oven Assoc. Winter Meeting, February 2008, Pittsburgh

Kokal, H & Poveromo, Joseph J., “Update on Alternative Ironmaking Processes” , Steel Scrap & Scrap Substitutes 2007 conference on October 29-30, 2007 at the Renaissance Waverly Hotel in Atlanta, Georgia USA

S. Beaudin*, A. Audet*, S. Miller* and J. J. Poveromo**, QCM’s Direct Reduction Grade Pellet Quality
Development, AIST (Assoc. Iron & Steel Technology) Annual Meeting, Indianapolis, May, 2007

Joseph J. Poveromo, Master Class on “Utilization of Iron Ores in Blast Furnace and Alternative Ironmaking”,
AJM (Australian Journal of Mining), Perth, Australia, February 27, 2007

Joseph J. Poveromo, “Alternative Ironmaking Processes” , Intertech/PIRA India Coke Conference, Nov. 17-19, 2007, Kolkata, INDIA

Joseph J. Poveromo and Fred C. Rorick, “Technical Developments in North American Ironmaking”, 4thd 4th International Congress on the Science & Technology of Ironmaking, Osaka, November, 2006

Joseph J. Poveromo, “Outlook for Blast Furnace Ironmaking", Seminar at IntertechPIRA Met Coke World Summit 2006”, Philadelphia, Oct. 2006 and also at Intertech/PIRA India Coke Conference, Nov. 17-19, 2007, Kolkata, INDIA

Joseph J. Poveromo, “The Evolution of Ironmaking”, Keynote Paper, Sohn International Symposium on Advanced Processing of Metals, ed. F. Kongoli; TMS

Joseph J. Poveromo, “Raw Material Challenges for Blast Furnace and Direct Reduction Ironmaking”, Keynote Paper, 5th IAS Ironmaking Conference, November 7-10, 2005, Hotel Colonial, San Nicolas, Argentina

Joseph J. Poveromo, Short Course on “New situation in the supply of Iron Ore for Direct Reduction and Blast Furnace”, IAS (Argentina) 5th Ironmaking Conf., November 7, 2005, Hotel Colonial, San Nicolas, Argentina

Joseph J. Poveromo, “Raw Material Challenges for Ironmaking”, Met Coke World Summit 2005, Intertech, Oct. 19-21, Vancouver, B.C.

Fred C. Rorick, and Joseph J. Poveromo, . “Recent Developments in North American Ironmaking”, European Ironmaking & Cokemaking Congress, Stockholm, June 2005

Joseph J. Poveromo, “Outlook for Blast Furnace Ironmaking", Seminar at Intertech’s Met Coke World Summit 2004”, Chicago, Oct. 2004

Joseph J. Poveromo, “Blast Furnace Fuel Injection Trends”, Intertech’s “Met Coke World Summit 2004”, Chicago, Oct. 2004

Joseph J. Poveromo and Fred Rorick, “Update on North American Ironmaking”, 2nd International Meeting on Ironmaking, 1st Iron Ore Symposium, ABM, Vitoria, Brazil, September 2004

Joseph J. Poveromo, “Ironmaking and Steelmaking Developments in North America”, plenary paper, SCANMET II – 2nd International Conference on Process Development in Iron & Steelmaking, June, 2004, Lulea, SWEDEN

Joseph J. Poveromo, “Blast Furnace Ironmaking and Burden Requirements”, COREM Pelletizing Symposium, September 22-24, 2003, Quebec City

Fred Rorick and Joseph J. Poveromo, “IRONMAKING IN NORTH AMERICA”, 3rd International Congress on the Science & Technology of Ironmaking, Dusseldorf, June, 2003

Joseph J. Poveromo, “Ironmaking Processes to Feed New Melting Technologies”, 2003 SME Minnesota Section, UM Mining Symposium, April 8-9, 2003, Duluth, MN

Joseph J. Poveromo, “OUTLOOK FOR BLAST FURNACE IRONMAKING", CIM Montreal 2003”, May 5, 2003, Montreal, PQ CANADA

Joseph J. Poveromo, “Evolution of Feed Materials for the Electric Arc Furnace”, ISSTech03, Iron & Steel Society, Nashville, April 2003

Joseph J. Poveromo, “Ironmaking Technologies to Feed New Melting Technologies”, ISS Advanced Technology Symposium “New Melting Technologies II”, October 13-16, 2002, Pittsburgh, PA

Joseph J. Poveromo, “Outlook for Blast Furnace Ironmaking", Seminar at Intertech’s “Coke Outlook 2002”, October 2, 2002, St. Louis

Joseph J. Poveromo, “The Evolution of Ironmaking”, IAS 3rd Ironmaking Seminar - October 2001, Buenos Aires Sheraton Hotel., Argentina

Joseph J. Poveromo, Ed O’Donnell, Fred Rorick; “Coke Quality Requirements from a North American Perspective” - IISI’s Committee on Raw Materials ( RAMCO ) - Seminar on Coke – September 4-5, 2001 Brussels, Belgium

Joseph J. Poveromo, “Evolution of Feed Materials for the Electric Arc Furnace” Gerald Heffernan International Symposium “Innovative Technologies for Steel & Other Materials”, COM 2001, Annual CIM Conference of Metallurgists, Sheraton Centre, Toronto, August 26-29, 2001

G. Ouellet, S. Miller and J. J. Poveromo, “Maximizing Quality of QCM’s Direct Reduction Grade Pellets”, Iron & Steel Society Ironmaking Conference, March 2001, Baltimore

Joseph J. Poveromo, “Outlook for Blast Furnace Ironmaking", Intertech’s 5th Iron Ore Business Development Forum – “Iron Ore World”, and “Coke Outlook 2000”, October 9 - 11, 2000, Chicago

Y.D. Yang, A. McLean, I.D. Somerville, J.J. Poveromo, “The Correlation of Alkali Capacity with Optical Basicity of Blast Furnace Slags”, Trans. of the Iron & Steel Society, Oct. 2000, also presented at Iron & Steel Society Ironmaking Conference, March 2001, Baltimore

Joseph J. Poveromo, “Iron Ores & Agglomeration”, AISE Foundation Seminar on “Introduction to Ironmaking”, October 1,2 2000, Pittsburgh

O’Donnell, EM and Poveromo, JJ, “Coke Quality Requirements from a North American Perspective” , Paris2000, European Ironmaking & Cokemaking Congress, Paris, June 2000.

Joseph J. Poveromo, “Iron-Bearing Raw Materials for Direct Reduction and Smelting Reduction”, Paris2000, European Ironmaking & Cokemaking Congress, Paris, June 2000.

Joseph J. Poveromo, “Iron-Bearing Raw Materials for Direct Reduction and Smelting Reduction”, Gorham Conference on “Beyond the Blast Furnace”, June 2000, Atlanta

Joseph J. Poveromo, “Trends, Issues and Challenges in Blast Furnace Ironmaking", Gorham Conference on “Mini and Integrated Mills in the New Millennium”, November 3 - 5, 1999, Atlanta, Georgia

Joseph J. Poveromo, “Technical Developments including Application of Computer Models to Optimize Blast Furnace Operations”, invited paper, SCANMET I - 1st International Conference on Process Development in Iron & Steelmaking, June 7-8, 1999, Lulea, SWEDEN

Joseph J. Poveromo, Serge Miller, David Mothersill, Rick Schat, “Development of Pellet Properties for Enhancing Blast Furnace and DRI/EAF Operations”, IISI RAMCO Seminar on Sinter & Pellets, June 1-2, Brussels, BELGIUM

Joseph J. Poveromo, “Development and Application of Computer Models to Optimize Blast Furnace Operations”, invited Keynote Lecture for 27th Annual McMaster Symposium on Iron and Steelmaking, “Use of Models to Optimize Blast Furnace Operations”, May 24-26, 1999

Joseph J. Poveromo, Serge Miller, Gilles Ouellet, “Blast Furnace Pellet Quality at Quebec Cartier Mining Company”, 1999 Winter Meeting of the Eastern States Blast Furnace & Coke Oven Association Meeting, February 5, Monroeville, PA

R. Fournier, G. Ouellet, J. Poveromo, “Blast Furnace and Direct Reduction Pellet Quality Maximization at Quebec Cartier Mining Company “, ISS 1998 ICSTI/Ironmaking Proceedings, Toronto, pp. 979 - 986

A. S. Mehta, V. Sahajwalla, J. J. Poveromo, T.F. Wall, “Fundamental Investigation of Slag/Carbon/Gas Interactions Occurring in a Blast Furnace during Pulverized Coal Injection, Proc. ICSTI’98/ISS Ironmaking Conference, March 1998, Toronto

J.J. Poveromo, "Modern Blast Furnace Ironmaking - Trends, Issues and Challenges", invited lecture for presentation at "Iron and Steel - Today, Yesterday and Tomorrow' Conference, 250th Anniversary of JERNKONTORET, June 11-13, 1997 Stockholm, also presented at 71st Annual Meeting, Minnesota Section SME, April, 1998, Duluth

J. J. Poveromo, "Coke in the Blast Furnace", lecture prepared for the 1997 McMaster University Cokemaking Course, May, 1997, Hamilton, Ontario, also presented in May 1999

A. S. Mehta, V. Sahajwalla, J. J. Poveromo' Consumption of Residual Char in Blast Furnace Coal Injection - Slag/Carbon/Gas Interactions, Proc. ISS Ironmaking Conference, April 1997, Chicago

G. P. Larin & J.J. Poveromo, "Quebec Cartier Mining Co. and Its Role as a Supplier to World Iron Ore Markets", The 3rd Australia-Pacific Iron Ore Steel Forum 1997 - March 19-21 1997, Hotel Nikko Darling Harbor, Sydney

J.J. Poveromo & H.H. Jacobsen, "QCM's Role as a Quality Iron Ore Supplier to Integrated and Direct Reduction Ironmakers", Gorham/Intertech "Iron Ore 96: Supply,

Demand, and Quality for Steel and Alternative Iron Unit Production", Charlotte, North Carolina, Nov. 18-20, 1996

J.J. Poveromo, "Operational Considerations for High Level Blast Furnace Fuel Injection", 1SS Ironmaking Conf., March 24-27, 1996, Pittsburgh

J.J. Poveromo and H.H. Jacobsen, "Key Considerations in the Use of Iron Ore Products in Direct Reduction Processes", Gorham Conference on Scrap, Scrap Substitutes, March 5-7, 1996, Atlanta

A.J. Fischer, E. Godin, J.J, Poveromo, "Development of Pellet Properties for North American and European Blast Furnace Operations", European Ironmaking Congress, Ghent, Belgium, September 1996

J. J. Poveromo, Invited as "Chairman of the Open Forum Discussion" for the 23rd Annual McMaster Symposium on Iron & Steelmaking on "Improved Productivity of Blast Furnace Operations", May 9-11, 1995, Hamilton

J.J. Poveromo, "Introduction-Burden Distribution in the Blast Furnace Process" and "Two-Bell Top Burden Distribution in the Blast Furnace", lectures presented at the Iron & Steel Society Short Course on Blast Furnace Burden Distribution, April 2, 1995, Nashville

J.J. Poveromo, "Innovations in Ironmaking and Steelmaking", University of Minnesota Taconite Conference, "A Discussion of the Minnesota Iron Ore Industry - A New Beginning", March 1, 1995, Minneapolis

J.J. Poveromo, "The Role of Ironmaking in the Transformation of the North American Steel Industry", Luncheon Speaker at the Eastern States Blast Furnace & Coke Oven Association Winter Meeting, Feb. 10, 1995

J.J. Poveromo, "Blast Furnace vs Alternative Ironmaking", Panel Discussion at "Ironmaking 2000" Iron and Steel Society Advanced Technology Symposium, Myrtle Beach, October, 1994

J.J. Poveromo, "Coke Quality Required for Blast Furnace Operation", Panel Discussion in Coke Quality Session at 1994 AISE Annual Convention, Cleveland, September, 1994

J.J. Poveromo "The Role of Ironmaking in the Transformation of the North American Steel Industry", invited Keynote Lecture at the First International Congress of Science and Technology of Ironmaking, (ICSTI'94), June 1994, Sendai, Japan

J. J. Poveromo, "Blast Furnace Fuel Injection", McMaster University Blast Furnace Ironmaking Course, Hamilton, Ontario, May 1994

J.J, Poveromo, "Introduction-The Role of Fuel Injection in the Blast Furnace Process" and "Natural Gas Injection in the Blast Furnace", lectures presented at the Iron & Steel Society Short Course on Blast Furnace Fuel injection, March 20,. 1994, Chicago

J. J. Poveromo, "Blast Furnace Burden Distribution with Pellets", presented at AISE Annual Meeting, Pittsburgh, PA, Sept. 1993

J. J. Poveromo, "AISI Survey of Blast Furnace Pellet Properties", Proc. ISS Ironmaking Conf., Dallas, Texas, March 1993 ( already presented at May 1992 AISI Ironmaking Technical committee Meeting in Hibbing, Minn.

S. T. Vessey and J .J. Poveromo, "Production and Blast Furnace Performance of a 1 % Limestone Pellet", Proc. AIME Duluth Meeting & Mining Symposium, Jan. 1993

J. J. Poveromo, "Blast Furnace Aerodynamics", McMaster University Blast Furnace Ironmaking Course, Hamilton, Ontario, presented in 1999, 1998, 1996, 1994, 1992, 1990, 1989, 1987, 1986, 1984, 1982, 1981, 1980

J.J, Poveromo, "Pellet Product Quality and Future Trends in Pellet Utilization", District 2 Meeting of 1CM, Sept Iles, Quebec, Sep.1992

S.C. Panigraphy, M.J. Rigaud, J.J. Poveromo and D. P. Durko, "Evaluation of Carol Concentrates and Pellet Chips as Sinter Mix Components for Bethlehem Steel's Burns Harbor Sinter Plant", 1SS Ironmaking Conf. Proc.. Toronto, 1992

J.J. Poveromo, G.S. Hegedus. J.A. Carpenter, T.J. Strayer, "Enhanced Operation of Bethlehem's Medium and Large Sized Blast Furnaces", Proc. European Ironmaking Congress, Glasgow, Scotland. September 1991, also presented at Eastern States Blast Furnace & Coke Oven Association Winter Meeting, Feb. 1992

J.J. Poveromo, A.W. Kay, M.G. Ranade, "Product Specifications and Future Trends in Pellet Utilization", Proc. AIME Duluth Mining Symposium, January 1991, also presented at Western states Blast Furnace & Coke Oven Association Winter Meeting, March 1992

W. Jolley, P.C. Cheplick, J,J. Poveromo, "Blast Furnace Control in Bethlehem Steel", presented at 1991 TECHNO-23 Meeting of International Iron & Steel Institute, Stockholm, Sweden

F.C. Rorick, R.E. Ashman and J.J. Poveromo, "Sparrows Point `L’ Blast Furnace Control", 19th Annual McMaster Symposium on Iron & Steelmaking, Raceway Control for Optimum Blast Furnace Performance, May, 1991, McMaster University, Hamilton, Ontario

J.J. Poveromo, J. Ainsworth, and C.R. Beechan, "Effect of Furnace Process Conditions & Process Design on Blast Furnace Lining Wear” lecture presented at ISS Ironmaking Div.
Short Course on Blast Furnace Refractory and Lining Design, Detroit, April, 1990, also published in Proc. St. Louis Section of American Ceramic Society Meeting in 1990.

J. A. Carpenter, R.F. Chango, D. E. Swanson & J. J. Poveromo, "Development of High Productivity, Low Fuel Rate Blast Furnace Operations at Bethlehem Steel's Burns Harbor Plant", 1SS Ironmaking Conf. Proc., Chicago, 1989.

J. J. Poveromo, N.D.Hcdgson, E.L.Auslander and J.E.Lesko, "Effect of Coke Properties on Bethlehem Steel's Blast Furnace Operations" 17th Annual McMaster Symposium on Iron &

Steelmaking, Coke Properties Required By Blast Furnace For Stable operation, May, 1989, McMaster University, Hamilton, Ontario.,

R. G. Christman and J. J. Poveromo, "Effect. of Hot Metal Chemistry on Bethlehem's Ironmaking and Steelmaking Process Economics", Proc. ISS Ironmaking and Steelmaking Conference, Chicago, 1989.

J.J. Poveromo, "Development of Fluxed Pellet Technology in Bethlehem Steel", Proc. AIME Duluth Mining Symposium on Fluxed Pellets, Jan. 1988

M. J. Dwelly, T.J. Strayer, T.H. Horn, R.A. Strimple, J.J. Poveromo. "Modernization of the Bethlehem Plant's D Blast Furnace and Operation with 100% Pellet Burden", 1SS Ironmaking Conf. Proc. ,Pitts., 1987

T.J. Strayer, M.J. Dwelly and J.J. Poveromo, "Bethlehem D Furnace Fluxed Pellet Test Program", presented at the Eastern States (February 6) and Western States (March 6) Blast Furnace & Coke Oven Association Winter Meetings, 1987, published in Iron & Steelmaker, September, 1987.

R. G. Christman and J. J. Poveromo, "Hot Blast Temperatures, Stove Conditions, and the Use of Bethlehem's Computer Models", McMaster Symposium on Iron & Steelmaking No. 15, - The Ideal Hot Blast Temperature - Why and How?, May 19-21, 1987.

R,S. Hoffer, J.F. Syriste and J.J. Poveromo, "Burden Distribution Experiences at Bethlehem Steel's Sparrows Point L Blast Furnace", Proc. 1SS Ironmaking Conf., Wash. D.C., 1986, pp. 401-430.

J.J. Poveromo, "Blast Furnace-Basic Principles and Rules of Thumb", lecture presented at Blast Furnace Short course on Control, sponsored by ISS at Chicago, April 1984 and in Pittsburgh, Feb. 1985.

J. J. Poveromo, S. V. Milanoski and M. J. Dwelly, ”Development of Bethlehem's Two-Bell-Top Furnace Charging practices", Proc. ISS Ironmaking Conf., Atlanta, 1983.

J. J. Poveromo and J.W. Hlinka, “Development and Application of Bethlehem Steel's Blast Furnace Charging Model", 3rd PTD Conf. Proc. of ISS-AIME, Pittsburgh, 1982.

J. J. Poveromo, "Blast Furnace Burden and Gas Distribution", Iron and Steelmaker, July 1979

J. J. Poveromo, et.al .,"Burden Permeability Studies, Fundamental and Applied Research”, ISS-AIME Ironmaking Proc.1977, Pitts.

J.J. Poveromo, W. D. Nothstein and J. Szekely, "An Experimental Measurement of Raceway Dimensions in Bethlehem Steel Corporation's Beth., Pa , Plant", ISS Ironmaking Proc., Toronto, 1975

J.J. Poveromo, J. Szekely and M. Propster, "Flow Maldistribution in the Iron Blast Furnace", Blast Furnace Aerodynamics Symposium, Wollongong, Australia, 1975

J. Szekely. and J. J. Poveromo, “Flow Maldistribution in Packed Beds: A Comparison of measurements and Predictions”, AIChE J. Vol. 21, No. 4, 1975